IN991197 Sensor inductive IPF Electronic Việt Nam
IN991197 là cảm biến tiệm cận cảm ứng từ (Inductive Proximity Sensor) của IPF Electronic – Đức, chuyên dùng để phát hiện vật thể kim loại không tiếp xúc, đặc biệt phù hợp với môi trường nhiệt độ cao lên đến 230°C.
1. Thông số kỹ thuật
| Thông số | Giá trị |
|---|---|
| Model | IN991197 |
| Loại cảm biến | Inductive Sensor |
| Khoảng cách phát hiện | 13 mm |
| Kiểu lắp đặt | Non-flush (không âm) |
| Kích thước ren | M32 × 1.5 |
| Chiều dài | 91 mm |
| Nhiệt độ hoạt động | -25 đến +230°C |
| Điện áp cấp | 10–35 VDC |
| Ngõ ra | Kết nối bộ khuếch đại |
| Tần số đóng cắt | 200 Hz |
| Đầu kết nối | Lemo Connector |
| Vật liệu vỏ | Thép không gỉ 1.4305 |
| Cấp bảo vệ | IP50 |
2. Đặc điểm nổi bật
Chịu nhiệt độ cao: Hoạt động trong dải nhiệt độ từ -25°C đến 230°C, thích hợp cho các ứng dụng công nghiệp có nhiệt độ môi trường khắc nghiệt.
Phát hiện không tiếp xúc: Nhận biết vật thể kim loại mà không cần tiếp xúc trực tiếp, hạn chế hao mòn cơ học.
Độ bền cơ học: Thân cảm biến bằng thép không gỉ, thiết kế dạng trụ ren M32 chắc chắn.
Lắp đặt linh hoạt: Có thể phát hiện vật thể từ phía trước hoặc bên cạnh cảm biến.
ipf electronic+1
3. Ứng dụng thực tế
Giám sát vị trí cửa lò nung, cửa buồng gia nhiệt.
Phát hiện và định vị chi tiết kim loại trong dây chuyền sản xuất.
Kiểm soát vị trí phôi kim loại trong máy móc công nghiệp.
Đếm sản phẩm và giám sát chuyển động trên băng tải.
- Ứng dụng trong ngành luyện kim, gia công cơ khí, sản xuất thủy tinh và công nghiệp nhiệt.
LIST CODE
Model: IN991197
Description:
Sensor inductive, M32x1.5 91long, non-flush, Sn: 13,-25-230°C, connection to amplifier, lemo connector, IP50, VAModel: MZ070174
Description:
sensor magnetic, cylinder, 6.2mm T-groove, 6,3x30x6,2mm,
10-30V DC, 1x PNP NO, Cable connector M8 3pin 0.3m PUR
(Polyurethane), IP67, Zinc die-cast, LED, 2.5mT, mounting
Lateral, Short travel path, Sensor surface position Center of
the deviceModel: KV750450
Description:
Amplifier capacitive, high temperature, 30x47x75mm, 18-36V
DC, cable tail 2m PUR (polyurethane), IP65, polyamide, LEDModel: IN32E332
Description:
Sensor inductive, M32x1.5 83.5long, non-flush, Sn: 13,
0-230°C, connection to amplifier, lemo connector, IP67, stainl SteelModel: VKC0E333
Description:
Connection cable, 30m, Female (socket) 2pin Straight, Free conductor end, 2×0.25mm², Polytetrafluorethylene (PTFE), ShieldedModel: MZR40178
Description:
Sensor Magnetic, cylinder, 3.75mm round groove, Ø3.6mm 20long, 10-30V DC, 1x PNP NO, M8 cable connector 3-pin 0.3m PUR (polyurethane), IP67, stainl. steel, LED, 2.8mT, lateral installation, position of sensor surface at the edge of the deviceModel: VD589822
Description:
Encoder, programmable, Ø58mm 45long, hollow shaft 12mm, 65536 pulses, 5-30V DC, M12 connector 8-pin, IP65,
aluminumModel: IB18C340
Description:
sensor inductive, M18x1 70long, Flush, Sn: 5, 10-35V DC,-25-180°C, PNP NC, Cable 5m Polytetrafluoreth (PTFE), IP50, Stainless steel 1.4305, ATEXModel: IB18C339
Description:
sensor inductive, M18x1 70long, Flush, Sn: 5, 10-35V DC,-25-180°C, PNP NO, Cable 5m Polytetrafluorethylene
(PTFE), IP50, Stainless steel 1.4305, ATEXModel: IN991197
Description:
Sensor inductive, M32x1.5 91long, non-flush, Sn: 13,-25-230°C, connection to amplifier, lemo connector, IP50, VAModel: VKAE6941
Description:
Connection cable, 15m, Lemo Female (socket) 2pin Straight,
Free conductor end, 2×0.34mm², Polytetrafluorethylene
(PTFE), -40-250°C, ShieldedModel: IN991197
Description:
Sensor inductive, M32x1.5 91long, non-flush, Sn: 13,-25-230°C, connection to amplifier, lemo connector, IP50, VAModel: IN120170
Description:
Sensor inductive, M12x1 60long, non-flush, Sn: 6, 10-30V
DC, PNP NO, M8 plug connector 3-pin, IP67, nickel-plated (npltd) brassModel: IB180121
Description:
sensor inductive, M18x1 72long, Flush, Sn: 5, 10-30V DC,
PNP NO, Connector M12 3pin, IP67, Brass Nickel-platedModel: IN991197
Description: sensor inductive, M32x1.5 91long, non-flush, Sn: 13,-25-230°C, connection to amplifier, lemo connector, IP50, VA




Đánh giá
Chưa có đánh giá nào.