nhu@ansgroup.asia
0373 238 670F105-EM Frame Tester Mark-10 Vietnam
Được thiết kế chắc chắn và chính xác.
Khung thử nghiệm có độ cứng vượt trội với thiết kế ép đùn tùy chỉnh, được chế tạo để đạt độ cứng tối ưu. Việc hiệu chỉnh tại nhà máy đối với khung thử nghiệm và cảm biến lực đảm bảo độ chính xác vị trí ±0,006 inch / 0,15 mm dưới mọi tải trọng, ở mọi vị trí.
Động cơ bước và bộ điều khiển dẫn động trục vít bi và ray dẫn hướng tuyến tính, giúp vận hành êm ái, nhẹ nhàng, hầu như không có sự thay đổi tốc độ khi có tải.
| Individual Functions | |||
|---|---|---|---|
| Function | Part No. | Description | Co-requirements |
| Distance Measurement | EMF001-1 | Measure distance, with the ability to zero the reading. | – |
| Distance Limits | EMF002-1 | Stop at user-defined upper and lower distance limits. | – Distance Measurement (EMF001-1) |
| Preload | EMF003-1 | Zero the travel position automatically at a user-defined preload value. | – Distance Measurement (EMF001-1) |
| High Speed Extension | EMF004-1 | Extend the high end of the speed range to 45 in/min [1,100 mm/min]. | – |
| Low Speed Extension | EMF005-1 | Extend the low end of the speed range to 0.02 in/min [0.5 mm/min]. | – |
| Cycling | EMF006-1 | Set up to 100,000 cycles, with user-defined upper and lower dwell times. Cycle between any combination of limit switches, travel limits, and load limits. | – If cycling to distance limits, add Distance Measurement (EMF001-1) and Distance Limits (EMF002-1) |
| Break Detection | EMF007-1 | Stop when a user-defined drop in force occurs. | – |
| Load Holding | EMF008-1 | Stop at, and maintain, a user-defined load for a specified period of time. For best performance, use a force sensor with a capacity as close as possible to the target load. | – |
| FollowMe® | EMF009-1 | Push and pull on the sensor’s loading shaft to move the crosshead up and down, ideal for manual positioning prior to a test. Speed increases with applied force. | – |
| Graphing & Reporting | EMF010-1 | Graph load vs. time or distance, view statistics, export data, and generate a report, including graph, results, run data, and other information. | – If graphing load vs. distance, add Distance Measurement (EMF001-1) |
| PC Control | EMF011-1 | Control the test frame with your own application using a supplied library of motion control and data collection serial commands. While PC control is active, the control panel becomes a pendant, limited to basic, manual controls. | -AC1107 cable, test frame to PC |
| Coefficient of Friction Measurement | EMF012-1 | Measure static and dynamic coefficients of friction, with user-defined sled weight. | –G1086 coefficient of friction fixture (suggested) |
| Spring Rate Measurement | EMF013-1 | Measure spring rate, with user-defined start and stop data collection triggers. | -Distance Measurement (EMF001-1) Suggested functions: -Distance Limits (EMF002-1) -Preload (EMF003-1) |
| Packages | ||
|---|---|---|
| Package | Part No. | Includes |
| Distance Measurement | EMP001-1 |
|
| Speed Extension | EMP002-1 |
|
| Advanced Functionality | EMP003-1 |
|
| Complete Options | EMP-COMP-1 |
|
Đánh giá
Chưa có đánh giá nào.