ELECTRO-SENSORS Vietnam,Cảm biến tốc độ 1-800-328-6170 Model: #907 Electro-Sensors

1-800-328-6170 Model: #907 Electro-Sensors

SẢN PHẨM

Đại lý Electro-Sensors Vietnam,Cảm biến tốc độ 1-800-328-6170 Model: #907 Electro-Sensors,Model: #907 Electro-Sensors,Electro-Sensors Vietnam,1-800-328-6170 Model: #907 Electro-Sensors,Cảm biến tốc độ 1-800-328-6170 Model: #907 ,Cảm biến tốc độ 1-800-328-6170, Model: #907; Input: 5- 24VDC 

 

Đại lý Electro-Sensors Vietnam,Cảm biến tốc độ 1-800-328-6170 Model: #907 Electro-Sensors

Cảm biến tốc độ trục chống cháy nổ – Hiệu ứng Hall – Cảm biến tốc độ 1-800-328-6170, Model: #907

Đặc trưng

• Đầu ra tần số xung sóng vuông, Bộ thu mở NPN
• Hoạt động với tốc độ bằng 0 mà không mất tín hiệu
• Nguồn 5-24 VDC
• Cảm biến khoảng cách không tiếp xúc, khoảng cách lớn
• Tùy chọn hai chiều (Cầu phương)
• Hoạt động với Đĩa/Màng xung từ cảm biến điện từ
• Lắp ráp giá đỡ tùy chọn và nam châm gắn
• Hạng I, Hạng I (D) Hạng II, Hạng I (E, F, G) Hạng III
• Bao vây XLB-3

Cảm biến 907 XP được sử dụng trong các ứng dụng yêu cầu xếp hạng vị trí nguy hiểm hoặc trong các ứng dụng mà cảm biến có thể bị lạm dụng. Nó có lỗ mở ống dẫn NPT 1 inch để đi dây, dải đầu cuối để đi dây và được cung cấp giá đỡ và 10 ft cáp. Tùy chọn cầu phương (hai chiều) có hai cảm biến và được thiết kế cho các ứng dụng yêu cầu cả thông tin về tốc độ và hướng. Chỉ định căn chỉnh theo chiều dọc khi các nam châm sẽ đi theo chiều dọc trước mặt cảm biến và căn chỉnh theo chiều ngang khi các nam châm sẽ đi theo chiều ngang trước mặt cảm biến.

Các cảm biến tốc độ này sử dụng IC Hiệu ứng Hall cảm ứng từ để tạo tín hiệu xung kỹ thuật số để giao tiếp với công tắc tốc độ, máy đo tốc độ, bộ đếm, bộ điều hòa tín hiệu hoặc PLC. Các cảm biến Hiệu ứng Hall cung cấp khả năng vận hành ở tốc độ bằng 0 thực sự với đầu ra sóng vuông và khả năng chống nhiễu điện.

Đĩa tạo xung hoặc vòng đệm cổ chia tách của bộ tạo xung có gắn nam châm được gắn trên trục được giám sát. Khi trục quay, các nam châm đi qua phía trước cảm biến làm cho cảm biến chuyển đổi cao và thấp, do đó tạo ra đầu ra xung kỹ thuật số. Các cảm biến cung cấp tín hiệu sóng vuông kỹ thuật số với chu kỳ hoạt động 50/50 khi được sử dụng với các bộ tạo xung có các nam châm cách đều nhau của các cực xen kẽ, chẳng hạn như Đĩa xung Model 255 của Cảm biến điện. Khoảng cách khuyến nghị giữa cảm biến và bộ tạo xung là 1/4 inch +/- 1/8 inch. Tính linh hoạt của khe hở giúp cảm biến chịu được rung động, độ đảo trục, lệch trục và môi trường công nghiệp.

Nam châm gắn tùy chọn: MM-1.50 (Chỉ dành cho 907 XP)
(Xem trang Nam châm gắn EZ để biết thêm thông tin)

• Không cần khoan hoặc khai thác!
• PHẢI được sử dụng với Giá đỡ EZ-100

 

AS-Interface Speed Alarm          Shaft Speed Switches
Typical system also requires Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
ASiSA		800-001300
ASiSA 2 (MULTI-INPUT)		800-001301
AS-Interface Speed Alarm          Shaft Speed Switches
DMS Series          Shaft Speed Switches
Typical system also requires Sensor (not included) and Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
DMS SPEEDSWITCH AC INPUT 5-100 RPM		800-001800
DMS SPEEDSWITCH AC INPUT 100-5000 RPM		800-001810
DMS SPEEDSWITCH +24VDC 5-100 RPM		800-001820
DMS SPEEDSWITCH +24VDC 100-5000 RPM		800-001830
DMS SPEEDSWITCH +12VDC 5-100 RPM		800-001840
DMS SPEEDSWITCH +12VDC 100-5000 RPM		800-001850
DMS Series          Shaft Speed Switches
DR1000          Shaft Speed Switches
Typical system also requires a Sensor (not included) and Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
DR1000 115VAC		800-050101
DR1000 230VAC		800-050102
DR1000 12VDC		800-050103
DR1000 24VDC		800-050104
DR1000          Shaft Speed Switches
FB420          Shaft Speed Switches
Typical system also requires a Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
FB420 XP FINAL ASSY		800-045000
FB420          Shaft Speed Switches
LRB1000 / 2000          Shaft Speed Switches
Typical system also requires a Sensor (not included) and Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
LRB1000 SPEED SWITCH 115V		800-076000
LRB1000 SPEED SWITCH 230V		800-076001
LRB1000 SPEED SWITCH 24VDC		800-076010
LRB1000 SPEED SWITCH 12VDC		800-076011
LRB1000 SPEED SWITCH 36VDC		800-076013
LRB1000 SPEED SWITCH 115V PNP		800-076100
LRB1000 SPEED SWITCH 230V PNP		800-076101
LRB1000 SPEED SWITCH 24V PNP		800-076102
LRB1000 SPEED SWITCH 12V PNP		800-076103
LRB2000 SPEED SWITCH 115V		800-076002
LRB2000 SPEED SWITCH 230V		800-076003
LRB2000 SPEED SWITCH 24VDC		800-076008
LRB2000 SPEED SWITCH 12VDC		800-076009
LRB1000 / 2000          Shaft Speed Switches
M100 / 5000  PVC100 / 5000          Shaft Speed Switches
Typical system also requires a Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
M100 SPEED SWITCH		775-007700
M100PVC SPEED SWITCH		775-007710
M5000 SPEED SWITCH		775-007800
M5000-PVC SPEED SWITCH		775-007810
M100 / 5000  PVC100 / 5000          Shaft Speed Switches
M100T / 5000T          Shaft Speed Switches
Typical system also requires a Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
M100T SPEED SWITCH 230VAC		800-001760
M100T SPEEDSWITCH 115VAC FINAL ASSY		800-001700
M100T SPEEDSWITCH 12VDC FINAL ASSY		800-001720
M100T SPEEDSWITCH 24VDC FINAL ASSY		800-001740
M5000T SPEED SWITCH 230VAC		800-001770
M5000T SPEEDSWITCH 115VAC FINAL ASSY		800-001710
M5000T SPEEDSWITCH 12VDC FINAL ASSY		800-001730
M5000T SPEEDSWITCH 24VDC FINAL ASSY		800-001750
M100T / 5000T          Shaft Speed Switches
SCP1000 / 2000          Shaft Speed Switches
Typical system also requires a Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
SCP1000 SPEED SWITCH 115VAC		800-020100
SCP1000 SPEED SWITCH 12VDC		800-023100
SCP1000 SPEED SWITCH 230VAC		800-021100
SCP1000 SPEED SWITCH 24VDC		800-022100
SCP2000 SPEED SWITCH 115VAC W/JACK		800-040100
SCP2000 SPEED SWITCH 12VDC		800-043100
SCP2000 SPEED SWITCH 230VAC W/JACK		800-041100
SCP2000 SPEED SWITCH 24VDC		800-042100
SCP1000 / 2000          Shaft Speed Switches
SS110          Shaft Speed Switches
Typical system also requires a Sensor (not included) and Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
SS110 SLOW SPEED SWITCH 115VAC		800-077000
SS110 SLOW SPEED SWITCH 230 VAC		800-077001
SS110 SLOW SPEED SWITCH 24VDC		800-077002
SS110 SLOW SPEED SWITCH 12VDC		800-077003
OBS SS110 FINGERSAFE 115VAC		800-077100
OBS SS110 FINGERSAFE 230VAC		800-077101
OBS SS110 FINGERSAFE 24VDC		800-077102
OBS SS110 FINGERSAFE 12VDC		800-077103
SS110          Shaft Speed Switches
UDS1000          Shaft Speed Switches
Typical system also requires Sensor (not included) and Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
UDS 115VAC		800-050113
UDS 12VDC		800-050115
UDS 230VAC		800-050114
UDS 24VDC		800-050116
UDS1000          Shaft Speed Switches
1101 / 931         Shaft Speed Sensors
Typical system also requires Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
SENSOR 931 W/10′ CABLE	With bracket	775-093100
SENSOR 931 W/TEFLON CABLE	With bracket	775-093101
SENSOR 931 W/50′ CABLE	With bracket	775-093105
SENSOR 931 W/100′ CABLE	With bracket	775-093110
1101 18-36V HI TEMP 10′ PVC W/LBKT	For automotive 24V appl.	775-110001
1101 SS 3.75″ HE 10′ PVC W/O LBKT	Used on Ring Kits	775-110003
1101 SS 3.75″ HE 50′ PVC W/O LBKT	Used on Ring Kits	775-110004
1101 SS 3.75″ HE 100′ PVC W/O LBKT	Used on Ring Kits	775-110005
1101 SS 2.0″ HE 10′ PVC W/O LBKT		775-110100
1101 STD SS 2.0″ HE 10′ PVC W/LBKT		775-110101
1101 SS 2.0″ HE 50′ PVC W/O LBKT		775-110105
1101 STD SS 2.0″ HE 50′ PVC W/LBKT		775-110106
1101 SS 2.0″ HE 100′ PVC W/O LBKT		775-110110
1101 STD SS 2.0″ HE 100′ PVC W/LBKT		775-110111
1101 SS 2.0″ HE 10′ TEFLON W/O LBKT		775-110114
1101 SS 2.0″ HE 10′ TEFLON W/LBKT		775-110121
1101 / 931         Shaft Speed Sensors
1102 / 932 / 933 XP         Shaft Speed Sensors
Typical system also requires Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
932 STD AL BODY MR 10′ PVC W/LBKT		775-093200
932 AL BODY MR 50′ PVC W/LBKT		775-093201
932 AL BODY MR 100′ PVC W/LBKT		775-093202
932 SS BODY MR 10′ PVC W/LBKT		775-093203
932 SS BODY MR 50′ PVC W/LBKT		775-093204
932 SS BODY MR 100′ PVC W/LBKT		775-093205
OBS SENSOR 932-SS W/SEALED END 10FT		775-093207
SENSOR 933 W/10′ CABLE		775-093300
SENSOR 933 W/50′ CABLE		775-093301
SENSOR 933 W/100′ CABLE		775-093302
SENSOR 933 LARGE XP SENSOR		775-093303
1102 SS 3.75″ MR 10′ PVC W/O LBKT	Used on Ring Kits	775-110006
1102 SS 3.75″ MR 50′ PVC W/O LBKT	Used on Ring Kits	775-110007
1102 SS 3.75″ MR 100′ PVC W/O LBKT	Used on Ring Kits	775-110008
1102 SS 2.0″ MR 10′ PVC W/O LBKT		775-110200
1102 SS 2.0″ MR 10′ PVC W/LBKT		775-110201
1102 SS 2.0″ MR 50′ PVC W/O LBKT		775-110205
1102 SS 2.0″ MR 50′ PVC W/LBKT		775-110206
1102 SS 2.0″ MR 100′ PVC W/O LBKT		775-110210
1102 SS 2.0″ MR 100′ PVC W/LBKT		775-110211
1102 / 932 / 933 XP         Shaft Speed Sensors
1201 / 1202         Shaft Speed Sensors
Typical system also requires Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
1201 SS 3.75″ BIDI 10′ PVC W/RK BLOCK	Used on Ring Kits.  Small quadrature sensor	775-120101
1202 SS 5.5″ BIDO 10′ PVC W/RK BLOCK	Used on Ring Kits.  Large quadrature sensor	775-120201
1201 / 1202         Shaft Speed Sensors
Buyout Product
600 Series          Shaft Speed Sensors
Model	Notes	Part Number
SENSOR 608 PROXIMITY 8MM		775-007208
SENSOR 612 PROXIMITY 12MM		775-007206
SENSOR PROXIMITY 14mm		775-007209
SENSOR 618 PROXIMITY 18MM		775-007205
SENSOR 630 PROXIMITY 30MM		775-007204
SENSOR 608-1 PROXIMITY 8MM	Shielded	775-007201
SENSOR 612-1 PROXIMITY 12MM	Shielded	775-007202
SENSOR 618-1 PROXIMITY 18MM	Shielded	775-007207
SENSOR 630-1 PROXIMITY 30MM	Shielded	775-007203
600 Series          Shaft Speed Sensors
906 / 907 XP          Shaft Speed Sensors
Typical system also requires Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
906 STD AL BODY HE 10′ PVC W/LBKT		775-000500
906 AL BODY HE 50′ PVC W/LBKT		775-000511
906 AL BODY HE 100′ PVC W/LBKT		775-000505
906 BIDI AL BODY HE 10′ PVC W/LBKT		775-000504
906 BIDI AL BODY HE 50′ PVCW/LBKT		775-000509
906 BIDI AL BODY HE 10O’ PVC W/LBKT		775-000510
906 SS BODY HE 10′ PVC W/LBKT		775-000400
906 SS BODY HE 50′ PVC W/LBKT		775-000405
906 SS BODY HE 100′ PVC W/LBKT		775-000410
906 BIDI SS BODY HE 10′ PVC W/LBKT		775-000404
906 BIDI SS BODY HE 50′ PVC W/LBKT		775-000409
906 BIDI SS BODY HE 100′ PVC W/LBKT		775-000414
SENSOR 907 W/10′ CABLE		775-000600
SENSOR 907BV XP BI-DI 10′		775-006100
907 BIDI VERT ALIGN XLB3 HE 50′ PVC		775-006105
SENSOR 907BV XP BI-DI 100′		775-006110
SENSOR 907BH XP BI-DI 10′		775-006101
906 / 907 XP          Shaft Speed Sensors
916A / 917A XP          Shaft Speed Sensors
Typical system also requires Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
SENSOR 916A 10FT W/BRKT		775-000801
SENSOR 916A 50FT W/BRKT		775-000802
SENSOR 916A 100FT W/BRKT		775-000803
SENSOR 916A 10FT TEFLON W/BRKT		775-000804
SENSOR 916A 50FT TEFLON W/BRKT		775-000805
SENSOR 916A 100FT TEFLON W/BRKT		775-000806
SENSOR 916A 10FT W/STANDARD BRACKET		775-000807
SENSOR 916A 50FT W/STANDARD BRACKET		775-000808
SENSOR 916A 100FT W/STANDARD BRACKET		775-000809
SENSOR 916A SS 10FT W/SS BRACKET		775-000810
SENSOR 917A 10FT W/BRKT		775-000811
SENSOR 917A 50FT W/BRKT		775-000812
SENSOR 917A 100FT W/BRKT		775-000813
916A / 917A XP          Shaft Speed Sensors
HE950          Shaft Speed Sensors
Model	Notes	Part Number
SENSOR HE950 10′ W/BRACKET		775-001400
SENSOR HE950  50′ W/BRACKET		775-001401
SENSOR HE950 100′ W/BRACKET		775-001402
SENSOR HE950 10′ TEFLON W/BRACKET		775-001403
HE950          Shaft Speed Sensors
Series 18          Shaft Speed Sensors
Typical system also requires Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
		18EHQNO-000
		18EHQNT-000
		18EHQPO-000
		18EHQPT-000
		18EHSNO-000
		18EHSNT-000
		18EHSPO-000
		18EHSPT-000
		18EMSNO-000
		18EMSNT-000
		18EMSPO-000
		18EMSPT-000
Series 18          Shaft Speed Sensors
SpeedTalker DeviceNet          Shaft Speed Sensors
Typical system also requires Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
SPEEDTALKER-DN (XP)		800-001100
SPEEDTALKER-DN (BH)		800-001200
SPEEDTALKER-DN (UI)		800-001400
SpeedTalker DeviceNet          Shaft Speed Sensors
ST420          Shaft Speed Sensors
Typical system also requires a Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
ST420-L 2 – 200 RPM, 8 PPR		800-001600
ST420-H 2 – 2000 RPM, 8 PPR		800-001601
ST420-C-0019 0.2 – 200 RPM, 8 PPR		800-001620
ST420-C-0020 0.2 – 2000 RPM, 8 PPR		800-001621
ST420-DI-L 2 – 200 RPM, 8 PPR		800-001900
ST420-DI-H 2 – 2000 RPM, 8 PPR		800-001901
ST420-DI-C-0019 0.2 – 200 RPM, 8 PPR		800-001920
ST420-DI-C-0020 0.2 – 2000 RPM, 8 PPR		800-001921
ST420-LT-L 2 – 200 RPM, 8 PPR		800-004100
ST420-LT-H 2 – 2000 RPM, 8PPR		800-004101
ST420-LT-C-0019 0.2 – 200 RPM, 8 PPR		800-004120
ST420-LT-C-0020 0.2 – 2000 RPM, 8 PPR		800-004121
ST420          Shaft Speed Sensors
Digital Ring Kits          Shaft Speed Pulse Generators
Model	Notes	Part Number
Small ring kit:  NEMA 56C, 5/8″ bore
DRK56C RING KIT 1101 199SM .625		775-210625
DRK56C RING KIT 1102 199SM .625		775-230625
Small ring kit:  NEMA 143TC, 145TC, 182C, 184C, 7/8″ bore
DRK143TC RING KIT 1101 199SM .875		775-210875
DRK143TC RING KIT 1102 199SM .875		775-230875
Large ring kit:  NEMA 182TC, 184TC, 213C, 215C, 254C, 1-1/8″ bore
DRK182TC RING KIT 1101 199SM 1.125		775-221125
DRK182TC RING KIT 1102 199SM 1.125		775-241125
Large ring kit:  NEMA 213TC, 215TC, 254UC, 256UC, 1-3/8″ bore
DRK213TC RING KIT 1101 199SM 1.375		775-221375
DRK213TC RING KIT 1102 199SM 1.375		775-241375
Large ring kit:  NEMA 254TC, 256TC, 1-5/8″ bore
DRK254TC RING KIT 1101 199SM 1.625		775-221625
DRK254TC RING KIT 1102 199SM 1.625		775-241625
Small Quadrature ring kit:  NEMA 56C, 5/8″ bore
QDRK56C QUAD RING 1201 199SM .625		775-250625
QDRKL-56C QUAD RING KIT LINE DRIVER		775-280625
Small Quadrature ring kit:  NEMA 143TC, 145TC, 182C, 184C, 7/8″ bore
QDRK143TC QUAD RING 1201 199SM .875		775-250875
QDRKL-143TC QUAD RING KIT LINE DRIVER		775-280875
Large Quadrature ring kit:  NEMA 182TC, 184TC, 213C, 215C, 254C, 1-1/8″ bore
QDRK182TC QUAD RING 1202 199SM 1.125		775-261125
Large Quadrature ring kit:  NEMA 213TC, 215TC, 254UC, 256UC, 1-3/8″ bore
QDRK213TC QUAD RING 1202 199SM 1.375		775-261375
Large Quadrature ring kit:  NEMA 254TC, 256TC, 1-5/8″ bore
QDRK254TC QUAD RING 1202 199SM 1.625		775-261625
Digital Ring Kits          Shaft Speed Pulse Generators
Buyout Product
Encoders & Traction Wheels          Shaft Speed Pulse Generators
Model	Notes	Part Number
380 Series Rotary Shaft Encoder
Specify operating voltage, PPR, and single channel or quadrature output when ordering encoders.
Standard output (1-600 PPR)
Standard output (601-1,270 PPR)
Quadrature output (1-600 PPR)
Quadrature output (601-1,270 PPR)
Explosionproof housing
Optional IP 65 Gasket Shaft Seal
470 Series Heavy-Duty Rotary Shaft Encoder
Specify operating voltage, PPR, and single channel or quadrature output when ordering encoders.
Quadrature output (1-1,270 PPR)
Quadrature output (1,271-3,000 PPR)
Quadrature output (3,001-5,000 PPR)
Quadrature output (5,001-6,000 PPR)
HV 5-28 VDC line driver output
Traction Wheel Encoder Assemblies – includes mounting hinge and arm and wheel.
To complete the Traction Wheel Kit, add a single channel or quadrature model 380 encoder and mating connector.
TRACTION WHEEL KIT BLACK NEOP		976-001100
TRACTION WHEEL KIT TAN POLY		976-001200
TRACTION WHEEL KIT K-ALUM		976-001300
Encoders & Traction Wheels          Shaft Speed Pulse Generators
Magnet Wheels          Shaft Speed Pulse Generators
Model	Notes	Part Number
MAGNET WHEEL END MOUNT 60PPR AL.196 BORE	0.196 bore, Stock item	700-002400
Standard shaft mount wheels
MAGNET WHEEL .375 60PPMW	3/8 inch bore, Stock item	700-210375
MAGNET WHEEL .500 60PPMW	1/2 inch bore, Stock item	700-210500
MAGNET WHEEL .625 60PPRMW	5/8 inch bore, Stock item	700-210625
MAGNET WHEEL .750 60PPMW	3/4 inch bore, Stock item	700-210750
MAGNET WHEEL .875 60PPMW	7/8 inch bore, Stock item	700-210875
MAGNET WHEEL 1.00 60PPMW	1 inch bore, Stock item	700-211000
MAGNET WHEEL 1.125 60PPMW	1-1/8 inch bore, Stock item	700-211125
MAGNET WHEEL 1.250 60PPMW	1-1/4 inch bore, Stock item	700-211250
MAGNET WHEEL 1.375 60PPMW	1-3/8 inch bore, Stock item	700-211375
MAGNET WHEEL 1.4375 60PPMW	1-7/16 inch bore, Stock item	700-211437
MAGNET WHEEL 1.500 60PPMW	1-1/2 inch bore, Stock item	700-211500
MAGNET WHEEL 1.625 60PPMW	1-5/8 inch bore, Stock item	700-211625
MAGNET WHEEL 1.875 60PPMW	1-7/8 inch bore, Stock item	700-211875
Magnet Wheels          Shaft Speed Pulse Generators
Pulser Discs          Shaft Speed Pulse Generators
Model	Notes	Part Number
2.5 – 2.75″ Discs
256 PVC 8 MAG 1/2 2.50x.25x.196 STD		700-000300
256A AL 8 MAG 1/2 2.50x.25x.196 STD		700-001600
4.0 – 4.75″ Discs
255 NYLON 16 MAG 4.00x.25x.196 STD		700-000200
255 SS 16 MAG 1/2 4.00x.25x.196		700-000203
255 PVC 16 MAG 1/2 4.00x.25x.196		700-000204
258 PVC 8 MAG 1/2 4.00x.25x.196 STD		700-000209
258A AL 8 MAG 1/2 4.00x.25x.196		700-000212
258 SS 8 MAG 1/2 4.00x.25x.196		700-000213
232 PVC 32 MAG 1/4 4.00x.25x.196 STD		700-001400
232 AL 32 MAG 1/4 4.00x.25x.196 STD		700-001401
232 SS 32 MAG 1/4 4.00x.25x.196		700-001402
255A AL 16 MAG 1/2 4.00x.25x.196 STD		700-001500
PDE450 PVC 20 MAG 1/2 4.00x.625x.196 ES		700-002600
PDE 450 SS 20 MAG 1/2 4.00X.625X.196		700-002603
PDE 450A AL 20 MAG 1/2 4.00x.625x.196		700-002610
PD455 PVC 20 MAG 1/2 4.75x.25x.196		700-002500
PD455 AL 20 MAG 1/2 4.75x.25x.196		700-002501
7.5 – 8.0″ Discs
PD725 AL 60 MAG 1/4 7.50x.25x.196		700-002800
257A AL 32 MAG 1/2 8.00x.25x.196 STD		700-002100
257 PVC 32 MAG 1/2 8.00x.25x.196 STD		700-002101
11.0 – 12.0″ Discs
Other Specials
Pulser Discs          Shaft Speed Pulse Generators
Split Collar Pulser Wraps          Shaft Speed Pulse Generators
Model	Notes	Part Number
Standard Width Wraps	Size ≤   (Round up to whole number for pricing)
For shaft speeds up to 3,000 RPM.	1 inch  PVC
O.D. = I.D. + 3″	2 inches  PVC
4″ Minimum O.D.	3 inches  PVC
Width of Wrap = 1.5″	4 inches  PVC
16 Magnets Standard	5 inches  PVC
	6 inches  PVC
Add $50 for keyway	7 inches  PVC
Add $2 per magnet or slug over 16	8 inches  PVC
	9 inches  PVC
	10 inches  PVC
Consult factory for all other configurations,	11 inches  PVC
materials and size.	12 inches  PVC
	13 inches  PVC
	14 inches  PVC
	15 inches  PVC
	16 inches  PVC
	17 inches  PVC
	18 inches  PVC
	19 inches  PVC
	20 inches  PVC
	Size ≤   (Round up to whole number for pricing)
	1 inch  ALUMINUM
	2 inches  ALUMINUM
	3 inches  ALUMINUM
	4 inches  ALUMINUM
	5 inches  ALUMINUM
	6 inches  ALUMINUM
	7 inches  ALUMINUM
	8 inches  ALUMINUM
	9 inches  ALUMINUM
	10 inches  ALUMINUM
	11 inches  ALUMINUM
	12 inches  ALUMINUM
	13 inches  ALUMINUM
	14 inches  ALUMINUM
	15 inches  ALUMINUM
	16 inches  ALUMINUM
	17 inches  ALUMINUM
	18 inches  ALUMINUM
	19 inches  ALUMINUM
	20 inches  ALUMINUM
Miniature Wraps	Size ≤   (Round up to whole number for pricing)
For shaft speeds up to 3,000 RPM.	1 inch  PVC
O.D. = I.D. + 1″	2 inches  PVC
4″ Minimum O.D.	3 inches  PVC
Width of Wrap = 1.25″	4 inches  PVC
16 Magnets Standard	5 inches  PVC
	6 inches  PVC
Add $50 for keyway	7 inches  PVC
Add $2 per magnet or slug over 16	8 inches  PVC
	9 inches  PVC
	Size ≤   (Round up to whole number for pricing)
Consult factory for all other configurations,	1 inch  ALUMINUM
materials and size.	2 inches  ALUMINUM
	3 inches  ALUMINUM
	4 inches  ALUMINUM
	5 inches  ALUMINUM
	6 inches  ALUMINUM
	7 inches  ALUMINUM
	8 inches  ALUMINUM
	9 inches  ALUMINUM
Narrow Width  Wraps	Size ≤   (Round up to whole number for pricing)
For shaft speeds up to 3,000 RPM.	1 inch  PVC
O.D. = I.D. + 3″	2 inches  PVC
7″ Minimum O.D.	3 inches  PVC
Width of Wrap = 0.625″	4 inches  PVC
16 Magnets Standard	5 inches  PVC
	6 inches  PVC
Add $50 for keyway	7 inches  PVC
Add $2 per magnet or slug over 16	8 inches  PVC
	9 inches  PVC
	Size ≤   (Round up to whole number for pricing)
Consult factory for all other configurations,	1 inch  ALUMINUM
materials and size.	2 inches  ALUMINUM
	3 inches  ALUMINUM
	4 inches  ALUMINUM
	5 inches  ALUMINUM
	6 inches  ALUMINUM
	7 inches  ALUMINUM
	8 inches  ALUMINUM
	9 inches  ALUMINUM
High Speed Aluminum Wraps	Size ≤   (Round up to whole number for pricing)
For shaft speeds up to 10,000 RPM.	1 inch  ALUMINUM
O.D. = I.D. + 1″	2 inches  ALUMINUM
2″ Minimum O.D.	3 inches  ALUMINUM
Width of Wrap = 1.5″	4 inches  ALUMINUM
2 Magnets Standard	5 inches  ALUMINUM
Note: O.D. will increase if keyway is specified	6 inches  ALUMINUM
	7 inches  ALUMINUM
Add $50 for keyway	8 inches  ALUMINUM
Add $2 per magnet or slug over 16	9 inches  ALUMINUM
Slotted Magnet Wraps	Size ≤   (Round up to whole number for pricing)
For shaft speeds up to 3,000 RPM.	1 inch  PVC
O.D. = I.D. + 3″	2 inches  PVC
7″ Minimum O.D.	3 inches  PVC
Width of Wrap = 1.5″	4 inches  PVC
16 Magnets Standard	5 inches  PVC
	6 inches  PVC
Add $50 for keyway	7 inches  PVC
Add $2 per magnet or slug over 16	8 inches  PVC
Add $60 for dovetail magnets	9 inches  PVC
	Size ≤   (Round up to whole number for pricing)
Consult factory for all other configurations,	1 inch  ALUMINUM
materials and size.	2 inches  ALUMINUM
	3 inches  ALUMINUM
	4 inches  ALUMINUM
	5 inches  ALUMINUM
	6 inches  ALUMINUM
	7 inches  ALUMINUM
	8 inches  ALUMINUM
	9 inches  ALUMINUM
Stainless Steel & All other specials
Split Collar Pulser Wraps          Shaft Speed Pulse Generators
TT420          Temperature Sensors
Model	Notes	Part Number
TT420
TT420F	Probe only	800-001510
TT420S	Probe only	800-001520
TT420Z 2″	Probe only	800-001543
TT420Z 4″	Probe Only	800-001503
TT420Z 4″ WITH 1/4″ NPTF ZERK FITTING	Probe + grease adapter	800-001505
TT420Z 4″ WITH 1/8′ NPTF ZERK FITTING	Probe + grease adapter	800-001504
TT420Z 6″		800-001500
TT420Z 6″ WITH 1/4″ NPTF ZERK FITTING	Probe + grease adapter	800-001502
TT420Z 6″ WITH 1/8″ NPTF ZERK FITTING	Probe + grease adapter	800-001501
TT420Z 8″		800-001530
TT420Z 8″ WITH 1/8″ NPTF ZERK FITTING	Probe + grease adapter	800-001545
TT420Z 12″		800-001519
TT420-LT (Half Inch)
TT420Z-LT (1/2 in, 10 ft, 4in)		800-001514
TT420Z-LT (1/2 in, 10 ft, 6in)		800-001516
TT420Z-LT (1/2 in, 10 ft, 8 in)		800-001570
TT420Z-LT (1/2 in, 10 ft, 10 in)		800-001571
TT420Z-LT 12″ PROBE 1/2″ CONDUIT		800-001528
TT420S-LT (1/2 in, 10 ft, R-Angle)		800-001527
TT420S-LT (1/2 in, 10 ft, Straight)		800-001524
Accessories & Spare Parts	Notes	Part Number
LUG MOUNT ADAPTER FOR TT420S-LT		776-001300
MAGNET MOUNT FOR TT420S 3/8-16		776-001400
TT420          Temperature Sensors
Rub Block Door Assemblies          Belt Alignment
Model	Notes	Part Number
STANDARD
RUB BLOCK DOOR ASSY	STANDARD ASSEMBLY	800-002800
ADJUSTABLE
SLIDING RUB BLOCK DOOR ASSEMBLY	ADJUSTABLE ASSEMBLY	800-003000
UNISTRUT
RUB BLOCK PLATE ASSY (UNISTRUT)	UNISTRUT ASSEMBLY	776-001200
Rub Blocks          Belt Alignment
Buyout Product
BA100          Belt Alignment
Model	Notes	Part Number
BA100-1 BELT ALIGNMENT SWITCH		800-002000
BA100-1X BELT ALIGNMENT SWITCH		800-002200
BA100-2 BELT ALIGNMENT SWITCH		800-002100
BA100-2X BELT ALIGNMENT SWITCH		800-002300
BA100-2 BELT ALIGNMENT SWITCH EPOXY COAT		800-002101
BA100          Belt Alignment
HAZARD MONITORS          Hazard Monitors
Model	Notes	Part Number
ELECTRO-SENTRY COMMAND CENTER
ELECTRO-SENTRY 1		800-200000
ELECTRO-SENTRY 16		800-200010
HAZARD MONITORS          Hazard Monitors
Buyout Product
AC-D-4M          Tachometers, Counters & Displays
Model	Notes	Part Number
ACD4M 4 DIGIT LG DISPLAY CTR		100-540000
AC-D-4M          Tachometers, Counters & Displays
AP1000          Tachometers, Counters & Displays
Typical system also requires a Sensor (not included) and Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
AP1000 STD 115VAC		800-082000
AP1000 STD 230VAC		800-082001
AP1000 STD 12V		800-082002
AP1000 STD 24V		800-082003
AP1000 12VDC HIGH INTENSITY DISPLAY		800-082004
Accessories & Spare Parts	Notes	Part Number
ENCLOSURE NEMA 4X 10X8X6 FG W/SWING OUT	AP1000	725-003700
AP1000          Tachometers, Counters & Displays
CT6000          Tachometers, Counters & Displays
Typical system also requires a Sensor (not included) and Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
115 VAC
CT6000 115 VAC		800-074000
CT6000 4-20 115VAC		800-074400
CT6000 0-10 115VAC		800-074501
CT6000 RELAY 115VAC		800-074200
CT6000 RELAY 4-20 115VAC		800-074600
CT6000 RELAY 0-10 115VAC		800-074701
230 VAC
CT6000 230VAC		800-074100
CT6000 4-20 230VAC		800-074500
CT6000 0-10 230VAC		800-074502
CT6000 RELAY 230VAC		800-074300
CT6000 RELAY 4-20 230VAC		800-074700
CT6000 RELAY 0-10 230VAC		800-074702
10-30 VDC
CT6000 10-30VDC		800-074101
CT6000 4-20 10-30VDC		800-074503
CT6000 0-10 10-30VDC		800-074504
CT6000 RELAY 10-30VDC		800-074301
CT6000 RELAY 4-20 10-30VDC		800-074703
CT6000 RELAY 0-10 10-30VDC		800-074704
CT6000          Tachometers, Counters & Displays
Buyout Product
HH100          Tachometers, Counters & Displays
Typical system also requires a Sensor (not included) and Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
HH100 HAND HELD TACHOMETER		976-000900
REFLECTIVE TABS	HH-100 (qty 35)	972-006000
HH100          Tachometers, Counters & Displays
TR400          Tachometers, Counters & Displays
Typical system also requires a Sensor (not included) and Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
115 VAC
TR400 115VAC		800-078701
TR400 4-20 115VAC		800-078703
TR400 0-10 115VAC		800-078713
TR400 RELAY 115VAC		800-078705
TR400 RELAY 4-20 115VAC		800-078707
TR400 RELAY 0-10 115VAC		800-078717
TR400 6 RELAY WITH ANALOG 115VAC		800-078800
230 VAC
TR400 230VAC		800-078702
TR400 4-20 230VAC		800-078704
TR400 0-10 230VAC		800-078714
TR400 RELAY 230VAC		800-078706
TR400 RELAY 4-20 230VAC		800-078708
TR400 RELAY 0-10 230VAC		800-078718
TR400 6 RELAY WITH ANALOG 230VAC		800-078801
10-30 VDC
TR400 10-30 VDC		800-078719
TR400 4-20 10-30 VDC		800-078720
TR400 0-10 10-30 VDC		800-078723
TR400 RELAY 10-30 VDC		800-078721
TR400 RELAY 4-20 10-30 VDC		800-078722
TR400 RELAY 0-10 10-30 VDC		800-078724
TR400 6 RELAY WITH ANALOG 10-30VDC		800-078802
TR400 QR 2 RELAY 10-30VDC		800-078804
TR400 QR 6 RELAY 10-30VDC		800-078803
TR400C
TR400C RELAY 115VAC		800-078709
TR400C RELAY 4-20 115 VAC		800-078710
TR400C RELAY 230 VAC		800-078711
TR400 SGA
TR400SGA 115VAC CONV		800-079000
TR400SGA 230VAC CONV		800-079001
TR400SGA 10-30VDC CONV		800-079002
TR400          Tachometers, Counters & Displays
TR5000          Tachometers, Counters & Displays
Typical system also requires a Sensor (not included) and Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
115 VAC
TR5000 115 VAC		800-072000
TR5000 4-20 115VAC		800-072400
TR5000 0-10 115VAC		800-072501
TR5000 RELAY 115VAC		800-072200
TR5000 RELAY 4-20 115VAC		800-072600
TR5000 RELAY 0-10 115VAC		800-072701
230 VAC
TR5000 230 VAC		800-072100
TR5000 4-20 230VAC		800-072500
TR5000 0-10 230VAC		800-072502
TR5000 RELAY 230VAC		800-072300
TR5000 RELAY 4-20 230VAC		800-072700
TR5000 RELAY 0-10 230VAC		800-072702
10-30 VDC
TR5000 10-30 VDC		800-072102
TR5000 4-20 10-30 VDC		800-072503
TR5000 0-10 10-30 VDC		800-072504
TR5000 RELAY 10-30 VDC		800-072302
TR5000 RELAY 4-20 10-30 VDC		800-072703
TR5000 RELAY 0-10 10-30 VDC		800-072704
TR5000          Tachometers, Counters & Displays
SG1000          Slide Gate & Angle Position
Model	Notes	Part Number
SG1000A SLIDEGATE MONITOR FINAL ASSY		800-010000
SG1000B SLIDEGATE MONITOR FINAL ASSY		800-010100
SG1000C SINGLE-TURN MONITOR FINAL ASSY		800-010200
SG1000D DAMPER-VALVE MONITOR FINAL ASSY		800-010300
SG1000E SUBTURN SHAFT MONITOR FINAL ASSY		800-010400
TR400SGA 115VAC CONV		800-079000
TR400SGA 230VAC CONV		800-079001
TR400SGA 10-30VDC CONV		800-079002
HARDWARE STABILIZER BRACKET SG1000	Included with new SG1000A/C/D/E/F	300-100002
HARDWARE MOUNTING PKG FOR SG1000B CLAMP	Attaches with clamps	300-100000
OR
HARDWARE MOUNTING PKG FOR SG1000B BOLT	Attaches with bolts	300-100003
And
HARDWARE MTNG PKG FOR TELESCOPIC ARM		300-100001
TELESCOPIC ARM 10″ FINAL ASSY		800-010110
TELESCOPIC ARM 16″ FINAL ASSY		800-010116
TELESCOPIC ARM 18″ FINAL ASSY		800-010118
TELESCOPIC ARM 20″ FINAL ASSY		800-010120
SG1000          Slide Gate & Angle Position
AIFO-200          Signal Conditioners & Interface
Model	Notes	Part Number
AIFO-200 115VAC		803-000700
AIFO-200 230VAC		803-000701
AIFO-200          Signal Conditioners & Interface
ION          Signal Conditioners & Interface
Model	Notes	Part Number
ION ANALOG IN MODBUS RTU NODE		800-011000
ION DISCRETE I/O MODBUS RTU NODE		800-011100
ION FREQUENCY/DISCRETE-IN NODE		800-011200
ION  Signal Conditioners & Interface
SA420          Signal Conditioners & Interface
Typical system also requires a Sensor (not included) and Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
SA420 115VAC		800-084000
SA420 230VAC		800-084001
SA420 +12V		800-084002
SA420 +24V		800-084003
OBS SA420 FINGERSAFE 115VAC		800-084100
OBS SA420 FINGERSAFE 230VAC		800-084101
OBS SA420 FINGERSAFE +12V		800-084102
OBS SA420 FINGERSAFE +24V		800-084103
NEMA 4X
ENCLOSURE KIT LRB 8X6X6 NEMA 12	AP1000, LRB1000/2000, SA420, SS110	725-000004
ENCLOSURE KIT LRB 10X8X6 NEMA 4	LRB1000/2000, SA420, SS110	725-000005
ENCLOSURE KIT LRB 10X8X6 NEMA 4X	LRB1000/2000, SA420, SS110	725-000006
SA420          Signal Conditioners & Interface
MTS Series & SCU-200          Vibration & Tilt
Model	Notes	Part Number
Probe (requires Control Unit to complete a system)
MTS200 STD TILT SWITCH		775-003600
MTS20H STD TILT SW W/HANGER		775-003800
MTSS20H SS TILT SW W/HANGER		775-003700
MTS300 HD TILT SWITCH		775-002000
MTS30H HD TILT SW W/HANGER		775-003900
MTSS300 HD SS TILT SWITCH		775-002100
MTSS30H HD SS TILT SWITCH W/HANGER		775-003500
Control Units
SCU200 NEMA 4 115VAC		800-006001
SCU200 NEMA 12 115VAC		800-006000
SCU200 115 VAC STAINLESS STEEL		800-006005
SCU200 NEMA 4 115VAC INTRINSICALLY SAFE		800-006004
SCU200 NEMA4 230VAC		800-006003
SCU200 NEMA12 230VAC		800-006002
MTS Series & SCU-200          Vibration & Tilt
VS Series          Vibration & Tilt
Model	Notes	Part Number
VS1 NPN OUTPUT (NEMA 4X)		800-096001
VS1 RELAY OUTPUT (NEMA 4X)		800-096000
VS2 NPN OUTPUT (NEMA 4X)		800-096011
VS2 RELAY OUTPUT (NEMA 4X)		800-096010
VS1 RELAY OUTPUT NO LABEL (NEMA 4X)		800-096002
VS2 RELAY OUTPUT NO LABEL (NEMA 4X)		800-096012
VS1 FINAL ASSY NPN OUTPUT (XP BLANK)		800-096101
VS1 FINAL ASSY RELAY OUTPUT (XP BLANK)		800-096100
VS2 FINAL ASSY NPN OUTPUT (XP BLANK)		800-096111
VS2 FINAL ASSY RELAY OUTPUT (XP BLANK)		800-096110
VS1 FINAL ASSY NPN OUTPUT (XP WINDOW)		800-096121
VS1 FINAL ASSY RELAY OUTPUT (XP WINDOW)		800-096120
VS2 FINAL ASSY NPN OUTPUT (XP WINDOW)		800-096131
VS2 FINAL ASSY RELAY OUTPUT (XP WINDOW)		800-096130
VS Series           Vibration & Tilt
VUM Series          Vibration & Tilt
Typical system also requires a Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
Probe (requires Control Unit to complete a system)
VUM800 PROBE		775-080000
VIBRATION MONITOR 25′	VUM800 probe with 25 foot cable	775-080001
VUM800 PROBE W/STRAIN RELIEF		775-080002
Control Units
VUM800 CONTROLLER INTERNAL 115VAC		750-038900
VUM800 115VAC w/NEMA 12 ENCLOSURE		800-008900
VUM800 230VAC w/NEMA 12 ENCLOSURE		800-008901
VUM Series           Vibration & Tilt
Accu Series          Motor Drive Control
Typical system also requires a Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
ACCU-DIAL FINAL ASSY		800-044900
ACCU-DIAL TESCOM FINAL ASSEMBLY		800-044901
ACCU-DIAL W/ANALOG INPUTS FINAL ASSY		800-044903
ACCUDIAL W/ANA INPUTS CONQUIP FINAL ASSY		800-044904
ACCU-TACH FINAL ASSY		800-044910
Accu Series           Motor Drive Control
MS / ML Series          Motor Drive Control
Typical system also requires a Pulser Disc (not included) or WRAP (not included)
Model	Notes	Part Number
MS196
M196 MICRO SPEED STD 115VAC		800-006900
M196 MICRO SPEED STD 230V		800-006901
MS320
MS320 0-10 115 VAC		800-070701
MS320 W/OPTION 0-10 115VAC	2 Analog inputs, 2 relay outputs, 2 AC inputs, RS-422	800-070705
MS320 4-20 115 VAC		800-070703
MS320 W/OPTION 4-20 115VAC	2 Analog inputs, 2 relay outputs, 2 AC inputs, RS-422	800-070707
MS320 0-10 230VAC		800-070702
MS320 W/OPTION 0-10 230VAC	2 Analog inputs, 2 relay outputs, 2 AC inputs, RS-422	800-070706
MS320 4-20 230VAC		800-070704
MS320 W/ OPTION 4-20 230VAC	2 Analog inputs, 2 relay outputs, 2 AC inputs, RS-422	800-070708
MS320 0-10 10-30 VDC		800-070709
MS320 W/OPTION 0-10 10-30 VDC	2 Analog inputs, 2 relay outputs, 2 AC inputs, RS-422	800-070711
MS320 4-20 10-30 VDC		800-070710
MS320 W/ OPTION 4-20 10-30 VDC	2 Analog inputs, 2 relay outputs, 2 AC inputs, RS-422	800-070712
MS332
MS332 SYNCHRONOUS CONTROLLER		952-000000
MS332 STANDARD 230VAC		952-000002
Microspeed / Microlength Series           Motor Drive Control
Disc Guards          Accessories
Model	Notes	Part Number
DISCGUARD STANDARD M/907/SCP	907 XP, M, SCP, FB420, ASiSA, SpeedTalker DN-XP	725-005300
DISCGUARD EZ-MOUNT XP	907 XP, M, SCP, FB420, ASiSA, SpeedTalker DN-XP	725-005200
DISCGUARD LOWER EZ-MOUNT	For use with 725-005200	725-005201
DISCGUARD EZ-SCP		725-005600
DISCGUARD 931/933	Mini XP	725-005400
DISCGUARD  8″	Large, for discs over 4 inches	725-005500
Disc Guards           Accessories
Enclosures          Accessories
Model	Notes	Part Number
Explosion Proof
HOUSING XP XJMGCH TR400 CT6000	TR400, TR5000, CT6000, MS332, MS320	305-001400
HOUSING XP XJMAGCH N4 AP1000	AP1000, LRB1000/2000, SA420, SS110    WINDOW	305-001600
HOUSING XJMAGC MOD SOCKT 1.299 SA,LRB,SS	LRB1000/2000, SA420, SS110    NO WINDOW	305-001601
NEMA 4X
ENCLOSURE KIT LRB 8X6X6 NEMA 12	AP1000, LRB1000/2000, SA420, SS110	725-000004
ENCLOSURE KIT LRB 10X8X6 NEMA 4	AP1000, LRB1000/2000, SA420, SS110	725-000005
ENCLOSURE KIT LRB 10X8X6 NEMA 4X	LRB1000/2000, SA420, SS110	725-000006
ENCLOSURE NEMA 4X 14X12X8 FG W/SWING OUT	TR400, TR5000, CT6000, MS332, MS320	725-003600
ENCLOSURE NEMA 4X 10X8X6 FG W/SWING OUT	AP1000	725-003700
Enclosures          Accessories
EZ Mounting Brackets          Accessories
Model	Notes	Part Number
EZ-100 SHAFT MNT W/ UBLT AND 255EZ		810-000001
EZ-SCP BRACKET ASSEMBLY W/ 255EZ		810-000005
EZ-100 SHAFT MNT BRKT W/232A		810-000012
OBS-MAGNET MOUNT EZ		810-000013
EZ-100 SHAFT MNT BRKT W/232		810-000017
EZ-MOUNT BRACKET W/255A-EZ AND U-BOLT		810-000021
EZ-3/4IN SENSOR 16 MAGNETS		810-000040
EZ-18mm SENSOR 16 MAGNETS		810-000041
EZ-18mm SENSOR 8 MAGNETS		810-000042
EZ-18mm SENSOR 4 STEEL SLUGS		810-000043
EZ-12mm SENSOR 1 STEEL SLUG		810-000044
EZ-8mm SENSOR 1 STEEL SLUG		810-000045
MM-2.00 MOUNTING MAGNET		810-000050
MM-1.25  MOUNTING MAGNET		810-000060
EZ Mounting Brackets          Accessories
Buyout Product
IS Barriers          Accessories
Model	Notes	Part Number
BARRIER 772 INTRINSICALLY SAFE	For isolating pulse sensors from 15-18 VDC tachometers: TR, CT, MS PRODUCTS	597-000100
BARRIER 778 INTRINSICALLY SAFE	For isolating pulse sensors from 24 VDC PLCs	597-000101
BARRIER 765AC INTRINSICALLY SAFE	For isolating pulse sensors from the AP or SCU200 with tilt	597-000102
BARRIER 7787+ INTRINSICALLY SAFE	For ST420 or TT420.  DO NOT USE WITH DI or LT	597-000104
IS Barriers          Accessories
Miscellaneous          Accessories
Model	Notes	Part Number
HOUSING XP GRB MACHINED	DR1000, UDS1000	305-000600
MAGNET BAR 1.50 X .50 X .25		505-000300
MAGNET BUTTON .50 DIA X .250		505-000200
MAGNET MINI .250 DIA X .1875		505-001100
ADHESIVE EPOXY KIT		217-003200
FILTER AP1000 RED	AP1000	284-007700
BEZEL SMALL ENCLOSURE AP1000	AP1000	284-001800
ENCLOSURE PANEL AP1000 MOD	AP1000	284-001701
OBS-SOCKET 11 PIN OCTAL LRB SERIES	LRB, SA420, SS110	569-006100
REFLECTIVE TABS	HH-100 (qty 35)	972-006000
FACEPLATE KIT MS196 ML196	MS196/ML196	725-000003
FACEPLATE KIT MS320	MS320	725-000008
DIN RAIL 7.55mm X 35mm X 3in	per meter	260-000100
Miscellaneous          Accessories
Options          Accessories
Model	Notes	Part Number
TAG STAINLESS STEEL 1.875 X .625		213-000200
TAG STAINLESS STEEL 3 X 1.5		213-000201
LABEL PLASTIC BLACK 2 X .50		214-001600
EPOXY COATING	Any one component	991-000001
EPOXY ENCAPSULATION ANY COMPONENT	Any one component	991-000008
CONFORMAL COATING	Any one component	991-000003
Options          Accessories
Cable          Accessories
Model	Notes	Part Number
CABLE 22AWG 3 COND SHIELDED	3-wire sensors	610-000200
CABLE 22AWG 3 CONDUCTOR TEFLON	3-wire sensors	620-000400
CABLE 22AWG 4 COND SHIELDED	4-wire sensors	610-000500
CABLE 24AWG SHIELDED ALPHA 5092C	ST420/TT420	610-003100
CABLE 22AWG 4 CONDUCTOR TEFLON	4-wire sensors	620-000401
CABLE 18 AWG 4 COND CAROLPRENE JACKET	DOMINO	620-000300

 

 

=====================================================

Click xem thêm ứng dụng sản phẩm khác

Đại lý phân phối chính hãng tại Vietnam 

Báo giá ngay – Hàng chính hãng – Bảo hành 12 tháng – Tư vấn hỗ trợ kỹ thuật 24/7

Xem thêm sản phẩm hãng ELECTRO-SENSORS tại đây

Xem thêm thông tin về thương hiệu khác tại đây 

Xem thêm sản phẩm khác tại đây