PLMa – Phymetrix Loop powered Moisture Analyzer

• Range: -110°C to +20°C dewpoint ( -166°F to +68°F dewpoint )
• Accuracy: ±2°C temperature corrected
• Repeatability: 0.8°C
• Response time: 95% of step change in 3 min.
• Sample flow: >1 LPM

• Range:  -40°C to +70°C
• Accuracy:  ±2°C

• Easy and quick installation, no tools required

• 5VDC to 28VDC two wire loop operation 4mA to 20mA
• Housing isolated from 4-20mA Loop
• Measurement resolution of moisture sensor: 1pF resulting in less than 0.01 ̊C
• 5 pin M12 industrial connector IP68 when mating connector fully engaged
• Mating connectors with molded cables approved for Hazardous Location use available
• Two conductor cable min. 24AWG (for total cable length >1mile min. 20AWG) To meet CE requirements cable must be shielded.
• Built-in digital I/O for optionally controlling relays

Mechanical

• All 316 Stainless Steel and PTFE wetted parts for fast response time.
• Enclosure all stainless steel construction IP67 protection when installed
• Dimensions (overall) including connector- L: 3.25″ (82.6mm) Dia: 1.62″ (41.3mm)
• Process threads 3/4″-16 and 14mm x 1.25mm Oring-Seal and 1/4″NPT, can install with either threads
• Weight Total: 6 oz (0.17 Kg)
• Pressure: 5000 PSIA (345 Bar)

• PLMa Analyzer: -20°C to +60°C
• Electronics: -40°C to +85°C
• Moisture Sensor: -20°C to +60°C

• NIST traceable calibrations
• Units of measure: °C & °F dewpoint, ppmV, ppmW, µB H₂O vapor pressure, grams of H₂O / m³,
  Lbs H₂O /10⁶ standard cubic feet in Natural Gas.
• Digital & Analog: Two Wire 4/20mA loop with HART®
• Transmitter stores all HART setup